Monthly Archives: November 2015

Wide Steel Toe Boots

Are looking for some wide steel toe boots? We might have a few suggestions for you to check out! We picked the best ones, don’t worry! We are doing this to be able to give you a hand in choosing high quality in a fast manner.

  • CATERPILLAR MEN’S 2ND SHIFT 6 INCHES STEEL TOE BOOT

    08
    This boot is being sold for 59.87 to 114.67 US DOLLARS. The boot has been made from imported leather material with a man made sole. The shaft of this boot measures approximately 6 inches from the arch, and the heel measures approximately 1.25 inches. As you can see in the photo, there’s a platform which measures 0.75 inches. The boot is ankle-cut to be able to protect further. It comes with a steel toe and a padded ankle for comfort. Lastly, the boot is also oil-resistant so you’ll have an easy way of cleaning it.

  • DR. MARTEN’S MEN’S IRONBRIDGE WIDE STEEL TOE WORK BOOT

    09
    This boot is being sold for 98.21 US DOLLARS to 140.00 US DOLLARS. Just like the first one, this is made from imported leather that comes with a man made sole. The heel measures approximately 1.5 inches and the platform of the boot measures approximately 1 inch. The opening of the boot is around 6.5 inches. The boot is oil resistant as well as water resistant. No soaking socks here.

  • CATERPILLAR MEN’S WHISTON 6 INCHES LACE TO TOE BOOT


    10

    This boot is being sold for 67.30 US DOLLARS. The original price of this boot is at 123.00 US DOLLARS. It’s made with genuine leather and comes with a rubber sole. Rubber sole means that you will not easily slip. It’s super comfortable to use and is not heavy for your feet. You can use it for extended periods of time.

 

Which wide steel toe boot did you like from the ones above? What did you think about our article for today? We hope you enjoyed it and have gained new information about the topic that is helpful to you! If you have further questions related to the topic, then please, feel free to send us a message or leave us a comment below! It would be our pleasure to answer your questions! Also if you have enjoyed our article, it would be a great decision to subscribe to us! By doing so, we will be able to alert you thru your e-mail inbox that we have posted something new! That way, you are always informed! Feel free to browse around our website as well. You never know, maybe you’ll find something that could capture your interest. Have a nice! We hope to see you again here soon!

Men’s Steel Toe Boots

If you are looking for some steel toe boots for the men in your life or yourself if you are a man, then this welding steel tips and tricks website is the right place. We understand that before purchasing, you want to be sure of the quality of the product. That’s why we are here! It is our goal to help you find the right and high quality product for you to buy! We understand the value of money, and also of time. You have a lot of things to do, so allow us to search for the best steel toe boots for you.

steel toe boots

 

Steel Toe Boots are an important addition to a person’s Personal Protective Equipment (PPE), especially if he is a welder, a construction worker, an engineer who is immersed in the field, or a lumberman out in the woods. Steel toe boots are great because they protect your feet and they can serve as armor if ever someone is stupid enough to attack you or him. Here are a couple of Steel Toe boots that are worth looking at:

 

  • SKECHERS FOR WORK MEN’S 77044 FOREMAN CONCORE PADDED COLLAR STEEL TOE BOOT



    This boot is being sold for 47.18 US DOLLARS to 84.95 US DOLLARS. It is available in colors wheat (the one in the photo), dark brown, chocolate brown, and wheat nubuck.


    It was been made from high quality imported leather, and it comes with a thick rubber sole to make sure that whatever sharp object you step on, the sole of your feet will be safe. The shaft of this boot approximately measures 6.5 inches from the arch, meanwhile the heel measures approximately 1.25 inches. This boot comes with a platform that measure approximately 0.75 inches. The circumference can be easily adjusted to better suit your preference.

    Skechers understands that men in the field are required to work long hours so they have included a memory foam in the boots to cushion your foor and reduce foot fatigue.

  • KEEN Utility MEN’S MILWAUKEE 6-INCH STEEL TOE WORK BOOT

    This boot is being sold for 139.95 US DOLLARS to 159.99 US DOLLARS! Before, it was for 160.00 US DOLLARS, but it’s currently on sale on Amazon so go and get yourself one at the lowest price available for this product.

    The boot is made from imported high quality leather, and the fit is true to it’s size. Take note of the thick rubber sole of the boot. It will surely protect your feet from getting injured due to stepping on something sharp.

    The boot is oil-resistant, water resistant, and has a thick steel toe. Not to mention that it also comes with electrical hazard protection.

    This boot is a bit heavy though so take note of that before you purchase. However, if you want protection, then this boot will not fail you for sure.

Have you found the perfect men’s steel toe boots yet? Are you looking for more options? Not satisfied? Then feel free to browse around our website for more product reviews! We are sure that you will find something helpful around here. If you have any questions, feel free to send us a message or leave a comment below. It would be our pleasure to answer your questions. Don’t forget to subscribe to us to be able to get e-mail alerts every time we post something new. Hope to see you soon!

Welding Jackets

The cold winter months are here and it’s time to go and buy some welding jackets to keep you warm and toasty as you do your work. We understand that it’s a bit hard to continue working when you are freezing. That is exactly the reason why you need to invest in some good quality welding jackets. If you don’t have time to shop, there’s always the internet! You can get it delivered right at your doorstep! You don’t have to leave the comforts of your home. We made it even easier for you by gathering some of the best welding jackets out there and reviewing them. Through this, we aspire to be able to give you a hand in choosing. Here’s a couple of welding jackets that you should look at:

welding jackets

 

) BLACK STALLION BSX FR WELDING COAT



This jacket is being sold for 28.70 US DOLLARS at Amazon. The original price was at 32.90 US DOLLARS! This 9 oz flame resistant cotton is exactly the perfect pair for you during the cold winter months. If you notice, the collar is up. That is to be able to protect you from sparks. Not only that, you have dual pockets and adjustable cuff and waist straps.

 

) MILLER 244751 WELDING JACKET

This jacket is almost the same as the one above. It is also a 9 oz flame resistant cotton welding jacket. The special thing about this jacket is that the fabric is pre-shrunk to be able to eliminate sleeve length shrinkage for optimal fit. Just like the one above, there’s also an extra neck protection. There is also an accessible inside pocket, and five button snaps that provide an added protection.

This product is being sold for 21.88 US DOLLARS. The original price of this was at 24.50 US DOLLARS. You will only save 2.62 US DOLLARS but that’s okay I guess since it isn’t that expensive in the first place.

 

) LINCOLN ELECTRIC BLACK

This jacket is being sold for 31.89 US DOLLARS. The original price was 33.0 US DOLLARS. This jacket is made with the purpose of protecting the arms and torso of the wearer from welding heat and even spatter. It is made of cotton so you can be sure that it’s breathable. And did I mention that this cotton is fire resistant? There is also an inside pocket for storing little things.

 

 

What do you want for a welding jacket? Why don’t you subscribe to us? That way you will be able to get updates whenever we post something new. If you have any questions, feel free to leave us a comment or send us a message.

Spatter In Welding

Spatter in welding is a common occurrence and that’s probably why you are here because you want to get rid of it. Spatter is especially common in GMAW or that’s Gas Metal Arc Welding. Spatter is the droplets of molten material that are generated from the or near the welding arc. Of course, spatter isn’t nice to look at. It’s considered as a nuisance or a defect.  Take a look at the following images for spatter:

 


It doesn’t look nice, right? It looks messy and poorly made. Your costumers or boss will not be pleased when they see this in the final product. So what can you do to get rid of them? Don’t worry there are other ways to help you. But before we talk about getting rid of them, it would be best to know what causes them in the first place so we can try and avoid them. Plus, it will save us a lot of time when it comes to cleaning up.

Some causes of spatter in welding are:

(1) Incorrect Settings. You should always double check the settings like the amperage, voltage, and the electrical stick. To discuss this further, amperage is mostly dependent on the wire feed speed. An amperage that is too high will create a lot of spatter. A solution for this would be to decrease the wire feed speed or increase the voltage.  When it comes to voltage, if it is too low, spatter will increase. Naturally, the solution for this would be to increase your voltage.

Next is the Electric Stick Out factor. This refers to the distance from your contact tip to the work piece. Stay with a distance of 3/4″. Too much stick out will cause a lot of spatter so double check before working!

(2) Dirty Surfaces. It may be hard to believe but dirty surfaces actually create more spatter. It would do you good to take time to clean the welding materials before starting. It could be rust, oil, paint, or other things.

(3) Shielding Gas. This is an uncommon cause but not impossible. If you have checked everything else, and can’t seem to find the cause of the spatters, then you should check this one. Remember that the higher the Argon content, the smoother the arc, but Argon is quite expensive so many welders opt to use carbon dioxide which is a cheap choice. However, keep in mind that it creates a lot of spatter.

 

If all else fails to rid of the spatter in welding, you can always purchase anti-spatter sprays at Amazon or at a local store near you. They do not eliminate the spatter but they make it easier for you to wipe off the spatter. If you have further questions, feel free to message us or leave a comment below! We’d love to hear from you! You can also subscribe to us! See you soon!

Steel Toes Boots

Are you looking for the perfect Steel Toes Boots to protect your feet during your work? There are thousands of steel toe boots available in the market today, but how will you know which one is the best of all? Allow us to give you a few suggestions on what boot to buy. As I said, there are a lot of boots but we tried our best to pick out the best for you.  Here are the boots!

 

  • TIMBERLAND PRO MEN’S PITBOSS 6″ STEEL TOE BOOT02
    You can purchase this case for 86.27 US DOLLARS to 140.00 US DOLLARS. The boot is made from imported high quality leather, that comes with manmade sole. The shaft measures approximately 5.5 inches from the arch, and then the heel measures approximately 1.5 inches. The lace-up leather boot comes with a tonal stitching. If you look closer at the photo, you can see the logo patch on the tongue. For more comfort, the boot has been added with a padded collar.

    The boot is great since it is safe, tough, and really comfortable for your feet despite being worn for extended periods of times. The boot is a non slip, and it has been equipped with an electronic hazard protection that will be able to keep you safe from open circuits.

  • CATERPILLAR MEN’S 2ND SHIFT 6 INCHES STEEL TOE BOOT03
    This boot is being sold at 56.87 US DOLLARS to 114.67 US DOLLARS. TIt has been made with imported high-quality leather, and it also comes with manmade sole. The shaft measures approximately 6 inches from the arch, the heel measures approximately 1.25 inches. This boot comes with a platform that measures approximately 0.75 inches. The boot also comes with a padded collar that adds comfort for the feet. This means that you are able to wear this boots for extended periods of time. The outsole of this boot is oil-resistant.

    You can be sure that this boot will stay durable and strong. It is built to last.

  • DEXTER MEN’S DOUGLAS STEEL TOE WORKBOOT04

    This boot is being sold at 44.99 US DOLLARS. Before it was at 49.99 US DOLLARS, so you will be able to save 5.00 US DOLLARS. Although this isn’t made from genuine leather, but from fabric and synthetic leather, this boot is still able to pack a punch. You don’t even have to worry about sore feet because the boot comes with a 24/7 comfort insole.

    It is lightweight, and has a thick heel padding.

Looking for more steel toe boots? Feel free to browse around our website for more! If you want, you can subscribe to us to be able to get e-mail alerts every time we post something new. If you have further questions, don’t hesitate to leave a comment below or send us a message. We’d love to hear from you! Hope to see you again soon!

 

Welding Pinhole Reasons

There are lots of reasons for pinholes to appear in your welding material. They can be a bit hard to make them disappear completely, but there are some ways to reduce them. Today we are going to be handling this problem with a cause and effect state of mind. An effective way to solve something would always be to know what causes it in the first place. By doing so, we get to the problem immediately without further delay. Hopefully then, we’d know how to remedy it.

The bad thing about pinholes is that most of the time they can be seen with the naked eye, and these are of course considered as a welding defect. This lowers the quality of your weld and also would be a disappointment for your customers. Pinholes are a bit of a nuisance as they can appear in any area of your weld, so you would have to take extra time to check every corner and surface of your finished work. Another problem with pinholes is that they appear at the last minute. This usually happens during mechanical processing.

my_speeder30sm

One of the reasons for pinholes to appear could be traced back to the kind of material that you are welding. The nature of it. Did you know that there are two types of pinholes? We have the hydrogen pinholes and then the hydrogen-nitrogen pinholes. Let’s discuss them further, shall we? It’s good to remember that the nature of the metal you are welding has an effect on the chemical reaction that can happen during the welding. Let’s take for example the hydrogen pinholes. This is formed because of the reaction of water vapor with the elements that can be found in the metal. The water vapor will oxygenate the metal and atomic hydrogen will begin to form, and then this atomic hydrogen will be diffused into liquid metal. During this moment of chemical reaction, the bubbles will begin to form and then eventually will be pinholes.

The next reason would be because of the mold materials. It would do you good to keep in mind that too much nitrogen in your molding will result to an excessive moisture content. Other reasons would be that your material isn’t cleaned properly before welding, or that the slag is not skimmed completely which leads to slag inclusions. The said slags could then be a reason for gas bubbles to form.

pinholes

So those are the reasons why pinholes appear in your welding material. If you have further questions, you can leave a comment below, or better yet, send us a message. We would really love to clear up any confusion for you. Please feel free to browse around our website and hopefully, you might find something that can be useful to you. You can also subscribe to us so that you will be able to get e-mail alerts in your inbox every time we post something new! Through this, you won’t be missing a single post! Hope to see you soon!

Steel Toe Caps Boots

Are you by any chance looking for Steel Toe Cap boots? Then you are in luck! Today we are going to be talking about steel toe cap boots! If you want to stay safe and protected at your work place, then there’s no better accessory than a boot. Just because it’s your farthest extremity doesn’t mean that you should neglect keeping your feet safe from harm. You don’t know but you could probably step on a nail, or glass shards, and if you aren’t protected enough, this could would your soles. I’m sure you do not want that. Being safe at work is as important as finishing your task.

 

Here are some Steel Toe Cap Boots that you should check out:

 

  • PRO-MAN PM4002 Men’s S3 Outsize Black Steel Toe Cap Safety & Work Boots


    Made from leather, this boot is resistant to shock and from being crushed by something heavy. There’s a stainless steel in the midsole for additional protection.

    As you can notice in the photo, the collar is padded for additional comfort, and the laces of the boots aren’t annoying and won’t be getting the in the way of your task.

    The boot has been also equipped with anti-static properties, and a 90 degrees heel cup for additional stability.

    This boot is being sold at 79.95 US DOLLARS, and is available at sizes 15, 16, and 17 D(M) US.

  • DR. MARTENS’ CLASSIC 1919 STEEL TOE BOOT

    A longer neck means a bigger area of protection. Not only are your toes protected, but also your ankles.

You can purchase this boot starting at 69.99 US DOLLARS to 140.00 US DOLLARS. It’s made from important high-quality leather so you can be sure that it will last for quite some time.


The sole of this boot is synthetic but that doesn’t mean that it isn’t tough and durable. It will be able to protect you from any dangers that you may step upon.

Aside from that color in the photo which is Cherry Red, you can also purchase this boot in colors Black Fine Hair Cell, Blue, Purple, and White. Certainly, this boot will protect you and keep you stylish as well.

 

  • TIMBERLAND PRO DIRECT ATTACH 6” STEEL SAFETY TOE WATERPROOF INSULATED BOOT

    If that didn’t convince you that this boot is worth buying, then I don’t know what you are thinking. You can purchase this boot starting at 93.36 US DOLLARS up to 145.00 US DOLLARS.

    This boot is made from imported leather and it is finished with tough man made sole that is sure to keep your feet safe and warm because it is insulated. The shaft measures approximately 6 inches from the arch, and the heel measures approximately 1.75 inches. It comes with a padded collar for additional comfort.


    There’s a logo patch at the tongue. You can use this boot in cold and wet places because as I said above it is insulated, and it is waterproof. There will be no socks getting soggy wet with this product.




 

 

Which of the Steel Toe Cap Boots did you like the most? If you have any questions, feel free to send us a message! We’d love to hear from you! Want more? Browse around our website to find more boots, and other helpful tips! See you again soon! Don’t forget to subscribe!

Steel Toe Hiking Boots

If you have been feeling a little adventurous and has decided to go on a little hike up in the mountains, don’t forget to purchase your own steel toe hiking boots before you do! I know you are a big boy who can take care of himself, but these boots are here to give you a hand, and make sure that your hike doesn’t get cut short because you stepped on something and go wounded.

Here are some hiking boots that you should check out:

 

  • TIMBERLAND’S PRO MEN EXPERTISE HIKER STEEL TOE WORK BOOT

    You can purchase this for 42.78 US DOLLARS up to 115.00 US DOLLARS! I believe the price depends on the size that you are going to buy. Good news! This item is currently for sale on Amazon! You have the choice to avail the lower price on the options that are available for this product.

    Why should you go for this product?

    14
    This product is a perfect combination of fabric and leather. It’s a sure way to make sure that your feet are comfortable and protected – thanks to the steel toe – after hours of climbing up a steep hill. The sole of this boot is made from rubber to make sure you won’t accidentally slip on some moss.

    The fabric from which this boot has been made from has been lined with anti-microbial to make sure that you will get no infection during the trip. There are also added cushions in the boot for added comfort.

  • TIMBERLAND’S WHITE LEDGE MEN’S WATERPROOF BOOT

    151515
    Another one from Timberland because their products are just great! This one is being sold for 53.69 US DOLLARS up to 179.56 US DOLLARS! It’s also included in the sale, which means that you can choose the lowest price available for this from the options Amazon gives.

    It’s available in different colors such as black, brown, and wheat (the one in the photo).

    This product is made from leather so you can be sure that it’s tough and it will last for quite a long time. The sole of this boot is also rubber so that will prevent any slipping from happening anytime soon. The heel of this boot measures approximately 1.5 inches, meanwhile the platform measures approximately 0.75 inches. Keep in mind that because of the oiled leather finish the boot will naturally have some scuff marks on it.

    This boot is also waterproof so it keeps your socks from getting soggy. You won’t be getting foul smelling feet thanks to this boot! The boot is also breathable. The collar and tongue of this boot is padded so you can be extra comfortable.

Before going for a hike, pick out the best steel toe hiking boots for you! If you have any questions at all, feel free to leave a comment below or send us a quick message! You can also subscribe to us so you won’t miss a post! Have a nice day! 🙂

Steel Toe Boots Sale

Are you looking for a sale in steel toe boots?  It doesn’t matter whether you work for a construction site, or a lumber yard, or if you weld for a living, you need to have protection on your body as you go about your task. A few studies have shown that people tend to neglect their feet because they feel like there’s no danger coming to it because it is the furthest part from the danger. That may be true but your feet are at risk too! You could step on nails or pieces of metal chunks that might have rust in them, which could give you tetanus. In the end, it’s better that you are careful and prepared for all the possible things that could happen.

Anyway, here are a couple of steel toe boots that are definitely worth checking out:

 

  • TIMBERLAND’S PRO Men’s Pitboss 6″ Steel Toe Boot

    booooot

    The boots have been made from genuine high quality leather. And just take a look at that sole. It’s so thick! It won’t matter if you step on nails or pieces of glass because you can be sure that they will not be going anywhere near the sole of your feet. And that sole is special because it’s man made, not machine made. The heel measure approximately 1.5 inches, and the shaft measures approximately 5.5 inches from the arch. As you can see from the photo, it’s a lace up leather boot with tonal stitching, logo patch, and a padded collar for added comfort.

    You can purchase this boot for 87.57 – 177.99 US DOLLARS. It’s on sale on Amazon now! You can get the lowest price!

  • CATERPILLAR’S MEN 2ND SHIFT 6″ STEEL TOE BOOT

    boootssss

    This one is from Caterpillar. It’s made from high quality imported leather, and this boot also comes with a man made sole. Although, it doesn’t look as thick as the first one. You can still trust that this boot will be capable of keeping your soles safe from any harm. The shaft of this boot measures approximately 6 inches from the arch, and the heel measures approximately 1.25 inches. The platform of this boot measures approximately 0.75 inches. If you take a closer look, the leather is very nice. This ankle cut work boot comes with a padded collar for additional comfort.

    And the out sole of this boot is oil resistant, so no more accidental slips!

    You can purchase this boot for 59.99 to 114.67 US DOLLARS. Avail of the sale on Amazon now and you can choose to get this boot at the lowest price available.

 

There’s a sale at Amazon in Steel Toe Boots so go and get a boot there now! If you have any questions, feel free to message us or leave a comment below! We would really love to hear from you! Don’t forget to subscribe to be able to get daily alerts whenever we post something new! This way you will never be the last to know! Hope to see you again soon!

Steel Toe Boots

Are you in need of new steel toe boots? Well, then you are in luck because today we are going to be discuss about those! We will be also giving you recommendations on which steel toe boots to buy! A steel toe boot is also known as a “safety boot”, “Steel-capped boot” or a “safety shoe”. This is a type of footwear that has a protective reinforcement in the toe area. It’s great for workers such as those in. construction, welding, or Engineering. This can protect a person’s foot from falling objects or compression. Normally, the added reinforcement in the toe area would be made from steel, today it is also made from composite materials such as thermoplastic polyurethane (TPU) or Aluminum. These are required in construction sites.

 

Capture

 

You should take a closer look at your steel toe boots because most tend to have symbols on the outside such as:

Green Triangle which indicates that it is a class 1 toe cap with a puncture resistant sole.

Yellow Triangle which indicates that it is a class 2 toe cap with a puncture resistant sole.

White Square (with the ohm symbol) this one indicates that it is equipped with electrical protection.

Yellow Square indicated that it has anti-static protection.

Red Square indicates that it is electrically conductive.

Fir Tree indicates that it has protection against chain-saws.

Here is an interesting fun fact about steel toe boots. Many people have already proven them to be very useful when there are situations such as assaults. An example of this would be that incident with Josie Lou Ratley, who was a teenager in Florida.

boot4Didn’t you ever wonder why there are some night clubs in America that has signs on their dress codes that says steel toe boots are not allowed? This is to rid of the possibility of people to use it as weapons that can cause some serious injuries. If yo don’t feel secured after knowing this, then I don’t know what else to say.

It’s nice to know that every part of your body is protected, including your feet. There are a lot of risks involved in welding, and that’s why wearing the correct Personal Protective Equipment is important. If you are looking for steel toe boots, you should check out CATERPILLAR, Red Wing Shoes, Cabelas, Timberland, Dexter, and a whole lot more. There’s so many to choose from but I strongly recommend Caterpillar and Timberland.

Want more information with regards to Steel Toe Boots? Feel free to browse around our website! If yo have any questions or just want to discuss things, send us a message or leave a comment below! We’d love to hear from you! Have a nice day!