Justin Men’s Stampede Steel Toe Lace-Up Work Boots Review

Today’s review is going to focus on Justin Men’s Stampede Steel Toe Lace-Up Work Boots. Work boots are very important as a part of a welder’s personal protective equipment. That’s PPE, for short. As a welder, it is part of your responsibility to take care of yourself and with that comes protecting yourself from the safety and health risks that come with the profession. The Justin Boot Company has been around for more than 130 years, and since then it has been handcrafting western footwear. H.J. Justin was the founder and he started the company of an industry-leading western foorwear brand. Soon enough, the Justin brand became an icon in western culture and their heritage will always have a presences in the western culture that still continues today.

 

If you are interested in purchasing a Justin boot, you can purchase one from Amazon. They have a lot of Justin boots there that you can choose from, but they also have other brands there. At Amazon, you will be able to browse through them, read product descriptions, and if you like something, you will be able to pay for it online and also deliver it to your home or work address.

 

Let’s take a closer look at the boot:

 

 

The price of this boot starts at 80.94 US DOLLARS to 143.79 US DOLLARS. A good news about this boot is that it is part of the selected products that are on sale at Amazon at the moment. The sale doesn’t last for long, so you have to really grab it. It is currently in stock so if you want more, you can add it to your cart. The boot is made from genuine leather that won’t easily discolor or peel off. The shaft measures approximately 11 inches from the arch. The heel measures approximately 1.25 inches, and the boot opening measures approximately 15 inches around.

 

Here is what two customers said about the boot:

 

I had a pair a couple of years ago, before my employer went with Red Wing’s for work boots. Honestly, I never had a pair of Red Wing’s boots that didn’t fit, or were uncomfortable until the past 2 pairs that our company went with. The last straw for me was when the boot’s sole came undone from the bottom of the boot. I have only had that pair for about 5 months. I went back to a pair that I knew were comfortable, and would do the same job and fit the same criteria my employer requires for work boots. Took a little longer to break in than the Red Wings, but now my feet are not hurting any more and I am happy.” —  Ben Guerrero

 

I ordered those boots for my husband because he owned the same ones before and after a few years it was time for a new pair. By the way, he wears them every day. They are well manufactured and you definitely get quality for your money. My boots always last for years if you take proper care of them. Both my husband and I are big fans of Justin Boots. Ones they are walked in they feel like a second skin. Thumbs up.” — Jasmin Hoover

 

If you want to read more about this boot or other brands, you can subscribe to us here at Welding Steel Tips and Tricks for more. You can also browse around our website for more. Got a question? You can leave a comment below or send send us a message. We’d be happy to hear from you. It would be our pleasure to help you get more information. The more you know about a certain thing, the more you can make smart decisions. Have a great day!

 

 

Chippewa Men’s Waterproof Steel Toe Logger Work Boots Review

it’s a new day for a new review and today we are going to talk about Chippewa Men’s Waterproof Steel Toe Logger Work Boots. How did Chippewa begin? It started out like any company in a small factory on River Street near the Chippewa Falls in Wisconsin. It’s an American brand that you can be proud of. Up until today, the Chippewa brand continues to produce top quality rugged boots and shoes for every purpose. You can be sure of this brand because it has been founded by loggers and engineers. It is more than just a pair of boots. Each boot is built with an uncompromising quality and standard. It is the finest made, most reliable, authentic and rich in heritage.

 

You can purchase this boot from Amazon to make things easier for you. At Amazon, you can browse through thousands of products and brands. You can order for the product that you want, pay for it online, and have it delivered to your house or work address. It’s very convenient for those who are busy or those who don’t have the product available in their area.

 

Let’s take a look at the boot. Here is a picture of it:

 

 

The price of this boot starts at 195.24 US DOLLARS to 304.45 US DOLLARS. At Amazon, you will be able to get free returns. I know that it’s a little pricey but the quality of the boot is really worth it. It is made from genuine leather that won’t easily peel or discolor. Doesn’t the boot look good in the picture? The leather is tough and it requires little maintenance. It also comes with a thick sole that will protect your feet from getting injured in case you step on something sharp. It’s very dependable. There are a lot of risks as a welder both in health and in safety. For more added protection, the boot also comes with steel toe caps to protect your feet from getting squished in case something heavy falls on top of your feet.

 

Now let’s see what other buyers has to say about the boot:

 

“Have 3 pairs of these boots ( MADE IN USA ) purchased outside of amazon . The reason i have three pairs?? When you recive the boots they come with a card to have them rebuilt . Everything is rebuilt on the boot for 80 $( i think ). YOu have a broken in boot with new laces , uppers , iners , sole , laces . and they re water proof them .

Theese boots have take a beating I work for the rail road we can be outside in all weather from – 10 to 105 i wear these year round. At work I use them for digging in balast ( wich sucks ) and snow removal i have had many boots while working for the railroad Ive hade redwings ( the heelpopped off in 2 weeks while shoveling balast ) timberland pro ( after 6 months the steel toe came through the inside and cut my toe and regula chippeawa ( wich held up pretty good considering made in china but after abouta year it lost its waterproof and laces broke )

If you buy these boots and are comfortable with the high heel ( takes some getting used to but i feel it sraighten out my back) and the high sides ( i think they are 8″ loggers ) you will not want another boot . Do not buy the made in china ones first allthough they held up pretty good they are no where near as comfortable. Buy MADE IN USA chippeawa original.” — A. Bilella

 

What do you think about the boot?

 

If you want to read more product reviews, be sure to subscribe to us here at Welding Steel Tips And Tricks for more. Got a question? You can drop a comment below or send us a message. Have a great Friday! Don’t forget to browse around our website for more.

Wolverine Men’s Griffin 6” WPF Steel Toe Work Boots Review

Today’s review is going to be centered on Wolverine Men’s Griffin 6″ WPF Steel Toe Work Boots. It’s another brand that you will learn to love, if you don’t already. Amazon is a great place to check out if you don’t have any idea of what boot you should purchase. In Amazon’s website, you will be able to browse through a lot of different brands and products that will surely please you. Not only that, you will be able to purchase the products that have captured your interest, pay for it easily online, and then have it delivered to your home address or work address. A lot of people are going for online shopping these days because it is easier and more convenient. You don’t have to go out of your routine just to purchase one item, and if an item is unavailable in your area, with online shopping it will always be available. That’s the beauty of it. If you are new to online shopping, Amazon is a great website to try out.

 

Now, let’s go to the boot that we are going to be discussing today. Here is an image of the boot:

 

 

You can purchase this boot at a price of 139.95 US DOLLARS. What can I say about this boot? Well, first it is a very tough and dependable boot. You can trust the Wolverine brand to never let you down with their boots. The Wolverine brand has been making and designing boots for over 130 years. They make sure that each boot they make will be able to last for years. It was G. A/. Krause who started the brand. He was dreaming of owning a company and a tannery that employed his values of quality craftsmanship and incessant innovation.  Certainly, these qualities can be seen in every Wolverine boot up to this day.

 

The legacy of Wolverine boots live on today in their comfortable and durable boots with the top quality that Wolverine is known for. The brand has proven itself to be a leader when it comes to premium footwear. Until today, Wolverine continues to push itself to develop new innovative technologies that are designed for comfort and protection. A lot of welders trust the Wolverine brand. It has now become one of the most comfortable boot in the country.

 

The boot we are featuring today is made from the perfect combination of leather and hard rubber. The leather is synthetic though. I’m sure that you will love it. As I said, the leather is synthetic but that doesn’t mean that it looks plastic and fake. It looks and feels like real leather. You won’t notice the difference. The hard rubber is for the soles. They are hard enough to keep sharp objects from puncturing you and injuring you from under. I’m sure you will love it. Aside from that, the insides of the boot is padded so it’s very comfortable to use even if it’s already been a long day at work. For another added protection, the boot comes with a steel toe cap to shield your feet from heavy objects in case an accident happens. I must also mention that the boot is waterproof so you don’t have to worry about anything.

 

Let’s read this short review from a customer:

 

“The boot is fine. It’s very comfortable to walk around in, which is good, and I like the appearance of it. For it’s price, it’s not bad. I’ve been using it for three months already and so far I can’t really complain. It’s a bit heavy though but I guess that’s because of the steel toe cap. All good.” — Stanley

 

 

Do you want to read more product reviews? How did you find the boot?

 

If you want to read more product reviews about this brand or about other brands, be sure to subscribe to us at Welding Steel Tips And Tricks for more. Got a question or suggestion? You can drop a comment below or send us a message. We’re happy to hear from you! Cheers! Enjoy your day!

Timberland Pro Men’s 6” Endurance Premium WP ST Boots Review Request

Today’s review, we are going to talk about the Timberland Pro Men’s 6″ Endurance Premium WP ST Boot which is a request from a reader. If you have a boot that you want to be reviewed, you can drop a comment below or send us a message. Let me tell you more about the Timberland brand. I’m sure you’ve heard about it somewhere or you’ve seen a local retailer at a mall. The Timberland brand started with the focus of people who worked outdoors. However today, you will see that the brand has also expanded to apparels, watches, glasses, and sunglasses. The founder was Nathan Swatz and he started this company at Boston, Massachusetts. He was just an apprentice stitcher then.  In the year 1952, he bought half an interest in The Abington Shoe Company in the southern part of Boston. It was a good move, but of course, one that he wasn’t satisfied with. In 1955, he bought the remaining interest and that’s when he began to bring his sons into the company. It became a family owned business. Today, Timberland has become a popular brand all over the world. They seem to have branches or retail shops every where.

 

If there’s none near your place, you can always order online. Amazon is a great place to order a Timberland boot. There are a lot of people who put their trust on Amazon, and if you haven’t tried online shopping yet, it is definitely a website that you should try out. At Amazon, you will be able to purchase, pay for the products that you want, and have it delivered to your home or work address. It’s easy. There’s really no need for you to get out of your daily routine.

 

Now, let’s take a look at the boot. Here is an image of the boot:

 

 

GOOD NEWS! This boot is part of the sale that’s currently happening at Amazon now, which means that you will be able to get it at the lowest price that’s available at the select options. The price of this boot starts at 139.99 US DOLLARS to 210.99 US DOLLARS. The boot is made from genuine leather that doesn’t peel off or discolor. If you notice, the boot is a perfect combination of hard rubber and leather. The shaft of this boot measures approximately 5.5 inches from the arch. The heel measures approximately 1.75 inches.

 

A Timberland boot is engineered for the long hours on their feet. I’m sure that you will find the boot comfortable for the long day.

 

Here is what a customer thought about the boot after making the purchase:

 

“This is the 2nd pair of Timberland PRO I have bought. I am in love with the Anti-Fatigue technology. A lot of shoes just rely on a good insole to make the boot comfortable. This boot has a great insole and what really makes it work is the Anti-Fatigue, which is a memory foam/rubber beneath the insole that over time molds with your foot, making them even more comfortable. Only downside to this boot is they don’t last more than 1 1/2 year +. By a year, they will start to come apart a little if not alot. By my 18 month with them, they had no traction left and the glue keeping the sole attached was starting to fall off. Despite this, I will still only buy these boots.

I work 12 hour days on a concrete floor with no padding on the floor, my feet may tired by the end of the shift but they do not hurt. I highly recommend these boots.” — Brandon L. Addington

 

 

What do you think of the boot? Do you like the way it looks?

 

If you want more product reviews, you can subscribe to us here at Welding Steel Tips and Tricks for more. Got a question? You can leave a comment below or send us a message. Have a great day!

Double-H Men’s 12″ Steel Toe Western Boots Review Request

For today’s review, we are going to do a request from a reader to feature Double-H Men’s 12″ Steel Toe Western Boots! To start off, I must tell you that this certain brand is a little expensive, but is it worth the price? It certainly is! Let me give you a brief history about the Double-H brand. The boot has been around for more than 50 years and I can say that their boots are a little extraordinary. The design and style of the boots are perfect for the outdoor worker and the modern cowboy. I’m sure that welders, and all the hardworking men and women will find this boot satisfactory. A lot of people who work in farms go for this boot because of it’s performance, durability, style, and comfort. As a welder, you could also go for this boot since it meets the standards of a safety boot.

 

Let’s take a look at a picture of the boot:

 

 

The price of this boot may be high at 210.50 US DOLLARS to 234.50 US DOLLARS but the service and functionality of the boot also is. Those who have tried and learned to love this brand of boot says that there’s no boot in the market that can match it. Could that be true? Are you willing to test it out?

 

If yes, you can purchase this boot at Amazon. It’s as easy as one two three! I’m sure that you will enjoy online shopping at Amazon since it is easier to do it here compared to other online shops, not to mention that it is a reputable company so you can be sure that your purchases are in good hands. At Amazon, you will be able to purchase the product in a click, pay for it online, and have it delivered to your home address or work address. It’s so easy and so convenient! There’s no need for you to get out of your daily routine. And another plus of online shopping is that it makes the products which are originally unavailable to you, available!

 

Now, let’s get our focus back on the boot.

 

The boot is made from genuine leather from top to bottom. You can be confident that this boot will not peel off or discolor as time goes by. The quality of the boot is really good. Of course, since it is being sold at a high price compared to other boots. It’s not wrong for you to expect nothing but the best. Aside from that, the boot also comes with a lug sole sole. Americans can be proud of this product since it is made a hundred percent in America. 😉

 

Another plus points for this boot is that it comes with a Ultrawelt Gel Cell Heel Insert that absorbs shock and pampers the feet from the base. The boot is very comfy, especially with its inner lining which forms around your foot and helps keep the boot in shape. The boot also has excellent abrasion resistance, slip resistant, and oil resistant. For protection, the boot comes with a steel toe cap to keep heavy objects from squishing your feet in case they fall right on top of them. You also don’t have to worry about being punctured by sharp objects since the sole of the boot is hard rubber.

 

If you want to know more about this boot or other boots, you can subscribe to us here at Welding Steel Tips and Tricks for more. Got a question? You can drop a comment below. Have a great Tuesday!

Ariat Men’s Work-Hog Waterproof Composite Toe Work Boots Review

For this week’s first product review, we are going to start with Ariat Men’s Work-Hog Waterproof Composite Toe Work Boots. If you have noticed, most of the boots we have previously reviewed are steel toed. What makes the steel toe caps different from the composite caps? Which one is better? Which one is cheaper? Which one should you get? Don’t worry, by the end of this article, we will have all those questions lurking in your mind answered.

Let us get to know the two protective caps first. I’m sure that most of you are familiar with the steel toe caps. They have been around for quite some times, and are considered a classic. Basically, it is a touch piece of steel that protects your feet in case something heavy drops on top of it to prevent the squishing of your bones. Now, composite toe are new to many but a few have already heard of them I’m sure. Composite caps contain no metal. They are made from a combination of plastic, carbon fibre, and rubbers.

 

According to Workbootcritic, here are some of the Pros and Cons that they have listed down about the two:

STEEL TOE CAPS:

Pros:

  • Puncture protection
  • Shatter proof
  • Costs less

Cons:

  • Weighs more
  • Poor insulation in cold climates
  • Sets off metal detectors

 

COMPOSITE TOE CAPS:

Pros:

  • Lightweight
  • Better electrical resistance
  • Doesn’t set off metal detectors
  • Great insulation in cold climates

Cons:

  • Puncture protection is not consider as great as that of a steel toe cap
  • More expensive

 

So what do you think? Which one appeals to you more? It seems that they are both equal to each other. They have their differences and weaknesses, and I guess it all goes back to what you need from a boot. Or in what type of environment you work in. If you work in a cold climate, then a composite toe boot is better for you. If you have to pass through metal detectors daily, like in airports, you will most likely sway to composite toe boots. I think steel toe boots are reserved for more dangerous environments like construction sites or buildings that collapsed. So if you are looking for a composite capped boot, we have one here for you today.

 

Ariat men’s work-hog waterproof composite toe work boots could be the one you are looking for. Ariat is or was a brand that was focused on equestrian athletes but of course, their boots proved to be fitting for outdoors workers like welders as well that it became famous among workers. It increased their sales, of course. Here is an image of the said boot:

 

The starting price of this boot is at 149.99 US DOLLARS to 237.99 US DOLLARS. You can easily get this boot from Amazon. Have you heard of that online shop? A lot of people (even those who don’t live in the US) patronize the company since their prices are usually cheaper compared to other retail shops, but the quality is still the same. You will like the sole of this boot since it is made from DurathreadTM sole. It is stronger than your normal thread. The shaft of the boot measures approximately 10 inches from the arch. You can be sure that the boot is made from premium full grain leather for the foot and upper part. 😉 Plus this boot is a pull-on style which is easier and less hassle for you. No need to lace up! You just slip your feet in and you are good to go.

 

If you want to read more product reviews, be sure to subscribe to us here at Welding Steel Tips and Tricks for more. You can also browse around our website to read our previous product reviews. Who knows you might find the boots you are looking for in our next post. I’m sure you’ll enjoy sticking around our website since we have a lot of great content and we post regularly too. 😉 If you have a question, you can drop it in the comment section below or send us a message. Have a great day! Start your week right!

ariat men’s 6” groundbreaker waterproof steel toe work boots review

Today we are going to do a product review about Ariat Men’s 6″ Groundbreaker Waterproof Steel Toe Work boots. Finding the correct boot is important, especially for professional welders. What do you look for in a boot? Well, first, a boot must be durable and tough to be able to withstand the working environment of a welder. Welding is no walk in the park. You will be faced with different tasks and conditions everyday, and you will have to learn how to deal with them. There are safety risks involved in welding which could be you stepping on something sharp and rusty which could lead to infection and tetanus.

 

You can purchase this boot easily at Amazon. Many people prefer purchasing the items that they need through online shopping. Why? Because it is easier and you won’t have to break your daily routine. it’s especially great for people who have a tight schedule or if the product that they want isn’t available in their area. Just because it isn’t in your area, doesn’t mean that you can never own it. Amazon is a great website to start if you haven’t tried doing online shopping. You can pay for the product that you want online and even have it delivered to your home or work address.
Let’s take a look at the boot we are featuring today:

 

 

 

You can get this boot for a starting price of 106.69 US DOLLARS to 190.99 US DOLLARS. The product is currently in stock so if you want it, you can add it to your cart. The prices of products at Amazon are weirdly a little lesser compared to other retail shops, but still the quality is great. In fact, here are what some people had to say about the boots:

 

“Fits great and very comfortable. I was worried about the steel toe but there is plenty of room at the toe area.” — Ted

 

“The quality was good, but the sizing was way off. I have a pair of Artiats that are 12 EE and
These 13 EEs were way smaller. I was very disappointed.” — MAC

 

“My fifth pair of Ariat work boots in two years as a landscaper and there’s no better more comfy boot.” — Old School

 

“At first I wasn’t sure about purchasing this boot, but a close friend recommended it to me so I decided to give it a try. Now I’ve been using the boot for three months with no problem. It still looks as good as it did the first time I purchased it. Great boots! Sturdy and comfortable. Definitely a brand welders should try at least once.” — Carter

 

I’m sure you will love this boot. It has been made from real leather, so you can be sure that it won’t peel off or discolor easily. The sole of this boot is synthetic but I assure you that no sharp object will be able to easily penetrate it and cause injury to your feet. Aside from that, this boot has been equipped with steel toe caps to protect your free from  getting crushed in case something heavy falls on top of it. I’m sure that you will love this boot. The shaft of this boot measures 6 inches from the arch, while the  heel measures approximately 1.25 inches. The platform of this boot measures 0.75 inches.

 

What else is good about this boot? Well, this boot will be able to protect you from getting wet feet since it is waterproof. Being waterproof would also mean that the boot is less prone to being damaged. Water damages leather you see.

 

Anyway, if you want more product reviews, you can browse around our website or subscribe to Welding Steel Tips and Tricks for more. Got a question? You can leave a comment below or send us a message. Have a great day!

 

 

Carolina Men’s Logger 8″ Steel Toe Work Boots Review

Today we are going to focus our product review on Carolina Men’s Logger 8″ Steel Toe Work Boots! Another day, another brand! As we have said in the previous articles, finding the perfect work boot is an important step that you shouldn’t skip. If you want to save time and energy in looking for a boot – because there are a lot of brands and boots out there – you should try and narrow it down to what you need from a boot. Usually a welder would go for a boot that is sturdy, comfortable, and will be able to protect him or her from the risks that he or she could face in the welding area.

 

As a start, you can try and check out today’s featured boot from Carolina. Here is an image of the boot:

 

 

What do people have to say about this boot?

 

“At the time of this review, I have worn these boots a total of 15 hours. They are comfortable and the arch support is good. Quality speaking, the boots exceeded my expectation. Time and wear/tear are the true test and those evaluations are not included in this review. I am well pleased with both the comfort and quality.” — George Alley

 

“It is great finding a pair that fit my husband’s wide feet. He takes a 4e and says his piggy toe just touches the side. He wears them all day for work and says they are comfortable. Just wished it came that width in other colors too.” — Amazon Customer

 

“Nice comfortable boots so far. My only complaint is they put an eye at the very top instead of having the lace hooks go all the way up. That makes it difficult to keep the laces tight when putting them on. Otherwise, the material and build of the boots is high quality.” — Dad To 7

 

“I buy 2 pair of these at a time, about every 2-3 years. I wear them everyday, about 12-18+ hours a day, switching pairs every other day. I absolutely love them. I have high arches and need a lot of support. These are by far the most comfortable boots I’ve ever owned and the only ones I ever buy. I am currently on my 5th & 6th pair. If I try to wear sneakers for a trip to the store or out for dinner my feet are killing me within 2 hours, no matter what I put in for arch supports. I can’t say enough about these boots, from digging ditches, to framing, flooring, climbing ladders, driving equipment to roofing they’re all I wear.” — Clark’s Custom Carpentry & Repairs

 


 

What do you think of those reviews? What makes this boot good,you ask? First, you can easily purchase it from Amazon. A lot people purchase from Amazon because it is easier and hassle free compared to other online shopping websites. Plus, customer service from Amazon is really great. Next, the material that this boot has been made from is really good. It is made of genuine animal leather so you can be sure that it won’t peel or discolor easily. I’m sure you’d want a boot that looks good even after a few months or years. You just have to properly clean it and care for it. The shaft of this boot measures approximately 8 inches from the arch. For protection, the boot has been equipped with a steel toe cap to keep your feet protection in case something heavy falls on top of it. The boot is a 100% waterproof as well so you won’t have to worry about soaking your socks or your feet. This also means that there’s a lesser chance for bad odor to start in the boot.

 

I’m sure that you will find this boot light and ultra-supportive during your long days at work. These boots are the perfect companion for the job. You can really trust this boot since it’s from Carolina. Please take note that the boot is not thermally insulated.

 

If you want more product reviews, be sure to browse around the website or subscribe to us here at Welding Steel Tips and Tricks for more.  Got a question? You can leave a comment below. Have a great day! <3

 

Ariat Men’s Hybrid All-Weather WP Steel Toe Work Boots Review

For today’s review, we are going to be discussing about Ariat Men’s Hybrid All-Weather WP Steel Tow Work Boots. As I have said again and again, choosing the right work boot is important for a welder or any outdoor worker for that matter. But how can you know that you have chosen the right boot? In terms of looking for a boot, you should take note of the following qualities a boot has to have which are:

  • Durability – When we say something is durable, it is defined as “staying strong and in good condition over a long period of time”. How will you know that something is durable? You will have to research and ask around. You need to find out what type of materials was used to make the boot. Asking people who have the same boot or at least the same brand of the boot you are interested in getting is also a good move.I’m sure that you’d want the boot you choose to really serve you well and make you feel like it’s really worth the money you spent for it. Now, not all durable boots are expensive. There are some affordable ones that you have to keep an eye on.
  • Worth The Price – You don’t have to spend so much on a good boot when there are good boots being sold at an affordable price. The important thing about choosing a boot is really based on the quality of the boot itself. Most of the time (but not all the time) cheap boots are well, cheaply made. It means that the material that they used to make the boot aren’t really that good. The chance of this boot being worn out quicker is high and you may need to purchase a new boot again in a few months. If the boot is being sold for a reasonable price and the materials are good, then I can say that the boot is worth it.
  • Protection – Since welding is a profession with a lot of health risks and safety risks involved, you may want to consider at how your boot will be able to protect you from said risks. You would want a boot that is hard and sturdy, something that won’t be easily penetrated by sharp objects so as to avoid injuring your feet. You’d also want a boot that comes with a steel toe cap to prevent your feet from being crushed.

 

If you don’t have the time to head downtown yet, you can do some online shopping at Amazon for the meantime (or you can just go ahead and purchase through there since it’s easier 😉 ). Amazon is a great online shopping company that allows people to browse through a lot of quality products and brands. You can even read honest to goodness reviews about the product from fellow consumers to help guide your decision somehow.

 

For example, let’s take a quick look at this Ariat All-Weather boot WP Steel Toe Safety Boot!

 

 

With the weather being a little weird right now (thanks to global warming and industrial chemicals), we all need to be prepared for sunny days, rainy days, and snowy days even if it didn’t really start as that. The price of this boot at other retail shops is at 199.95 US DOLLARS but get this, at Amazon, you can purchase this boot at the same quality and brand for only 107.73 US DOLLARS to 179.95 US DOLLARS. You can even get free returns. Is the boot worth it? Does it meet our criteria?

 

Yes. The boot is made from genuine leather which means that it won’t peel off easily or discolor. Take note that the sole is synthetic though, but it’s made from hard rubber. The sole or the platform isn’t that thick though so if you are okay with that then it’s fine. Personally I prefer thick soles just to be sure that nothing sharp will get past them. The shaft of the boot measures approximately 13 inches from the arch, while the heel measures approximately 1.5 inches, and lastly, the boot opening measures approximately 16 inches around. The boot is waterproof so no soaked socks here!

 

What do you think of the boot? Does it meet your expectations? You can find it at Amazon!

 

If you want to read more welding related product reviews, you can subscribe to us here at Welding Steel Tips And Tricks for more. Got a question? You can drop a comment below or send us a message. Have a great day!

Ariat Men’s Sierra Steel Toe Work Boots Review

For today’s review, we are going to discuss another work boot from Ariat Men’s which is their Sierra Steel Toe. Choosing the right work boot is important for a welder or any construction worker. The right or proper work boot will be able to protect you from the different health risks that are present in the working area. Most welders are aware of the risks and complications that they are facing daily because of their work. It is important for a welder to protect his or her body since this is his main investment. If he is feeling ill or is injured, then he won’t be able to work properly. Clearly, this could affect the quality and productivity of a welder. I’m sure that you would want to give your best in your job or hobby, so of course, you should choose the right companions for the job.

 

Is the Ariat brand the right one for you?

 

Ariat is a brand that was founded on technology and innovation. The goal of this company is to produce the highest quality of footwear and apparel for the top equestrian athletes. But wait? So it’s not a boot for welders? It could be. Even if the Ariat brand is focused mostly on equestrian athletes, their products can be used by welders and construction workers. You see, athletes go through a lot of things – and maybe even rougher situations than welders go through, but that doesn’t stop them. That’s what Ariat wants for welders as well. I’m sure that you will love your Ariat work boots once you have tried them on. Let’s now go to the review proper.

 

You can purchase your favorite Ariat boots at Amazon. Have you heard of Amazon before? It is a very famous online shop in America, but a lot of non-Americans also patronize the brand. If you are new to online shopping, you may wanna do your first transaction with Amazon since they are a trusted and reputable company. When ordering online, you have to make sure that the details you enter on the order forms are correct or else, your order might end up in another person’s house. There are a lot of products available at Amazon. You will be able to look the details of the products through the pictures that they have uploaded. You will also be able to pay online and have them delivered to your home or work address.

 

Here is a picture of our featured boot for today:

 

 

This work boot is being sold for 114.99 US DOLLARS, and currently there’s only one left in stock! ONE! So hurry if you want it because you might miss it and it might take a while before they restock again. This boot is made with genuine leather that doesn’t peel off easily or discolor. I’m sure that you’d want your boot to look as good as it did when you first bought it. The shaft of this boot measures approximately 10 inches from the arch. If you can take a look at the photo again, you will notice that the boot has a six row stitch pattern that looks good on the boot and not over the top. This boot comes with a Goodyear welt.

 

More good news about this boot is that it is great when it comes to heavy oil duty. It also has a slip resisting Duratread outsole to keep you upright. As I said above, Ariat is a brand for equestrian athletes but their boots are high heat resistant which makes them a great companion for welders.

 

What do you think of the featured boot? Here is what one person thought:

 

“This boot is really worth the buy. Definitely no regrets. I’ve been using this boot for over two months now and I have no problems with it. Hopefully it will continue in the following months or years. I’d recommend it though.” — Ace289i

 

If you want to read more product reviews about welding related products, be sure to subscribe to us here at Welding Steel Tips And Tricks for more. Got a question? You can drop a comment below or send us a message. Have a great day!