If you are looking for a quality helmet, then Jackson’s auto darkening welding helmets should be a part of your choices. I am sure you will be pleased and satisfied with Jackson! In fact, they have made in their goal to satisfy each customer. They believe in listening to the voice of a customer as this can result in improved customer loyalty, a larger customer base with increased activity, a reduction of service failures, lowered operating costs, and even enhanced employee performance. They care a lot about their customers so they make sure that they provide quality solutions for everything that they do. In this company, you will find a unique blend of industry knowledge and a personal customer service that will help them achieve their goal – which is, again, to satisfy each customer.
Now, let’s take a look at some of their auto darkening welding helmet. Maybe you will find something that you like.
- Jackson Safety W40 Insight Variable Auto Darkening Welding Helmet, HaloXHere is a photo of the helmet:
It looks simple but it is a tough welding helmet. You can bring it home for only 139 US Dollars, and the best thing is that you will get a free shipping. This helmet has been equipped with quality lens that will give you a variable shade between 9 to 13, with a large viewing area of 3.93″ x 2.36″. It also has sensitivity and delay adjustments and four independent auto dimming sensors. For sure, this helmet will give you the compliance that you are looking for since it has met the ANSI Z87.1 + 2010 standards and it is also a CSA compliant.
The auto darkening filter of this helmet will allow welders to adapt to various working environments by controlling the shade of the lens that comes with the help of the adjustments for sensitivity from ambient lighting sources.
While having such a high tech control on a helmet will usually come for a price, this helmet comes with a great value instead.
Here is a customer’s review about it:
“As a relative beginner, I have started out my welding using a very cheap auto-darkening helmet (by Northern Tools). I thought, “helmets are helmets”, but having the opportunity to use a much higher-end helmet such as this one, I must say I am extremely impressed. Not a single adjustment was needed during an entire session in the workshop. I showed the helmet to some fellow artists and they all wanted to try it. The helmets provided by the workshop weren’t even auto-darkening, so I brought both helmets to loan my other one to one of the other students.
Long story short, everyone took note of the brand and told me they were going to get one too.
Here are some impressions I had while using the helmet:
– Light yet high quality construction.
– Excellent fit and comfort even after long session.
– Separate modes for Grinding and Welding
– Adaptive darkening offered superb clarity in all light levels at all times.
– Wide viewing angle
– Costs several times more than other variable auto-darkening helmets.
– Digital controls had a slight learning curve.”
On average, this welding helmet was rated with 4.7 stars out of 5 stars. That just shows that a lot of people enjoy this helmet a lot. No one gave it a rating of only 1 or 2 stars.
- Jackson Safety TrueSight II Digital Auto Darkening Welding Helmet with Balder Technology (29371)Admittedly, this helmet is a little expensive compared to the first one. Is it really worth it’s price? Here are some pictures of the said helmet:
The price of this helmet was once at 420.24 US Dollars, but with Amazon, the price has been reduced to 343.15 US Dollars and it already comes with free shipping. You will be able to save 77.09 US Dollars on this welding helmet. Is it good though? This helmet has a large viewing area of 3.25″ x 4″ and it has been considered best when it comes to class optical classification of 1/1/1/1. The helmet also comes with a built-in magnifying lens holder that is available with 7 focal powers. Additional lenses are sold separately.
This auto darkening welding mask has a digital keypad that has been designed by welders to be used by welders. With this keypad, you will be able to efficiently see what you need. The auto dimming hood features variable shade from 5 to 8 and 9 to 13. It is also something of a 3-in1 products with weld, grind, and torch modes. You will be able to make digital selections even with a gloved hand.
This helmet also meets the ANSi Z87.1-2010 and is a CSA Z94.3 compliant.
Here is a customer’s review about it:
“Man you don’t know what a good lid is until you have tried this one. It is a bit front heavy and the shell has some flex in it but the benefits outweigh these by a bunch. The view is huge. I think there may be only one other lid that has a view bigger than this one but this lid has an amber bypass filter. When not darkened it allows in more light which lets me see my material and fit-ups better. Color isn’t as distorted and when welding the puddle is easier to see. It has grind, torch and weld modes with plenty of configurability. It takes standard AAA batteries so if it gets low on batteries it is a simple swap out. It has solar cells to help prolong the battery life. 4 sensitive sensors keep the lid in sight of the arc even when welding out of position and with low amperage tig welding. I really like this lid.” – F. G
The average rating that this helmet received is at 4.8 stars out of 5 stars. No one rated this helmet with 3 stars and below. Not one.
If you want more welding reviews, be sure to subscribe to us here at Welding Steel Tips and Tricks! Have a great day! If you have any questions, feel free to drop a comment below or hit us up with a message.